In firearms, a safety or safety catch is a mechanism which is used to prevent accidental discharge of a firearm, thus helping to ensure safer handling and better maintenance.
Safeties can generally be divided into internal safeties, which typically do not receive input from the user. And external safeties are a type which allow the user to use a toggle with something like an ‘on’ and off’ button. It is similar to an automatic and manual condition. Cannon is one of the reputed brand which manufactures incredible and robust gun safes.
Some firearms which were manufactured in the late 1990s include mandatory integral locking machines, that must be deactivated using a specific key, before being used. Other devices in this category include trigger locks, bore locks and gun safes.
Typical Safeties in a Gun:
- Manual safety: The most common form of a safety mechanism is a switch, button or lever that, when set to the ‘safe’ position prevents firing even when the trigger is pulled. Manual safeties have various designs amongst themselves, but the two most common designs are that of a block and latch, which prevents the trigger from being pulled entirely. These are the oldest types of safeties which have been used for a really long time, though with modern technology, there have been certain changes. These include double action firearms such as revolvers which do not have a manual clicker since it is automatically provided because of its double action impact, which is prominent once fired.
- Grip safety: A grip safety is a lever or device which is situated on the grip of a firearm which must be activated by the user’s hand, as a natural consequence of holding the firearm in the prior action of firing it. The safety is deactivated only while the shooter maintains their hold on the grip, and is reactivated as soon as the shooter lets go of it. These gun safes offer the best gun safety features as compared to other gun safes available in the market.
- Decocker: Most traditional semi-automatic double action, single action pistols are generally designed to be carried with the hammer down, or rather uncocked, on a chambered round which at times, may or may not have a manual safety engaged. A decock/safety is a combination manual safety switch and a decocking lever. This eliminates the need to pull the trigger or to control the fall of the hammer. However, since all mechanisms might have a lapse and fail, it’s strongly recommended to keep the muzzle of the gun pointed in a safe direction while decocking.
Drop safeties refer to passive safeties which are designed to reduce the chance of a firearm accidentally discharging, when dropped or roughly handled. Drop tests were first introduced by the Federal Gun Control Act of 1968 for imported guns.
Drop safeties include Safety notches, Firing pin block, Hammer block and Transfer Bars. These are all various ways in which drop safeties are activated and used.
Disconnects: These are another type of safety for guns which involves mechanisms of disconnecting the trigger when mishandled or when the round isn’t completed. In order to activate the gun again, one must, pull the trigger, release it and then check if its working or not. No matter what safety is used within a gun, you must always take specific care in handling any type of gun and be thorough in its functionalities, since guns may be used for safety but it’ll be unfortunate when your own safety is compromised because of a minute’s hesitation. This will cause inconvenience of a lifetime. Make sure to research enough on the topic of hand guns and choose the most rational form of safety clutch there is in the market.…Read More